Return wavelength vs frequency

Wavelength and frequency are fundamental properties of electromagnetic waves, including infrared radiation, visible light, and radio waves. They are inversely related and describe the same wave phenomena from different perspectives.

• Definition: Wavelength is the distance between successive peaks (or troughs) of a wave. It is typically measured in meters (m), centimeters (cm), or nanometers (nm) depending on the type of electromagnetic radiation.
• Wavelength Range: Wavelengths can vary greatly across the electromagnetic spectrum. For instance, visible light has wavelengths ranging from approximately 400 nm (violet) to 700 nm (red), while radio waves can have wavelengths ranging from millimeters to kilometers.

• Definition: Frequency is the number of wave cycles that pass a given point per unit of time. It is measured in Hertz (Hz), where one Hertz equals one cycle per second.
• Frequency Range: Frequencies also span a broad range. For example, visible light frequencies range from about 430 terahertz (THz) to 770 THz, while radio frequencies can range from a few kilohertz (kHz) to several gigahertz (GHz).

• Inverse Relationship: Wavelength and frequency are inversely related through the equation \( \text{c} = \lambda \times \nu \), where \( \text{c} \) is the speed of light in a vacuum, \( \lambda \) is the wavelength, and \( \nu \) is the frequency. As one increases, the other decreases proportionally.
• Speed of Light: The speed of light in a vacuum is approximately \( 3 \times 10^8 \) meters per second (m/s). This constant speed helps maintain the inverse relationship between wavelength and frequency.

• Telecommunications: In telecommunications, different frequencies are used for various types of communication. For example, FM radio operates at frequencies between 88 MHz and 108 MHz, while microwave communications use frequencies in the gigahertz range.
• Astronomy: In astronomy, wavelengths and frequencies are used to study celestial objects. Different wavelengths provide different information about the objects, such as their composition, temperature, and distance.

• Spectroscopy: Spectroscopy involves measuring the wavelengths and frequencies of light to analyze the properties of materials. Instruments like spectrometers and monochromators are used to perform these measurements.
• Frequency Counters: Devices known as frequency counters measure the frequency of electromagnetic waves. These are crucial in various fields, including communications and electronics testing.

• https://en.wikipedia.org/wiki/Wavelength
• https://en.wikipedia.org/wiki/Frequency
• https://www.sciencedirect.com/topics/earth-and-planetary-sciences/wavelength